新闻中心 News
联系我们 Contact

打桩机锤头 洛阳锤铸造厂

联系人:朱文杰

咨询热线 :133 3388 9451

固定电话 :0379-64961800

客服信箱 :13333889451@qq.com

地址:河南洛阳 孟津工业园区 隆华大道

网址:www.chongjizuantou.com.cn

破碎机锤头材质分类

破碎机锤头材质分类高锰钢锤头 High manganese steel hammer head 高锰钢常用于锤式破碎机的生产,高锰钢破碎机锤头韧性好、耐磨性高、价格低。但随着耐磨材料的不断发展,高锰钢已被高铬铸铁和镍硬铸铁代替。但高锰钢的高韧性是其他材料无法代替的。除了生产破碎机锤头,也适用于大、中型破碎机齿板、破碎壁和大型挖掘机斗齿等。 High manganese steel is often used in the production of hammer crusher, high manganese steel crusher has good toughness, high abrasion resistance and low price. But with the continuous development of wear-resistant materials, high manganese steel has been replaced by high chromium cast iron and nickel hard cast iron. But the high toughness of high manganese steel is not replaceable by other materials. In addition to the production crusher hammer head, it is also suitable for large, medium-size crusher teeth boards, crushing walls and large excavator bucket teeth. 高铬合金锤头 High chromium alloy hammer head 锤柄部分使用高锰钢,锤头部分使用高铬合金。高铬合金锤头硬度好,在反击式破碎机中广泛应用,但韧性较差容易发生断裂,是一种优质的耐磨材料。适用于破碎高硬度物料,如石英石、玄武岩等。但由于制造工艺复杂,价格也较高。 3.硬质合金锤头 有很高的硬度、抗冲击能力强、成本低。硬质合金锤头的高耐磨性能是高锰钢锤头的20倍以上。同时高锰钢锤头的适用范围广,适用于所有破碎行业。 The hammer part USES high manganese steel, the hammer part USES high chromium alloy. The high chromium alloy hammer has a good hardness and is widely used in the counter crusher, but the toughness is relatively easy to break and is a high quality wear-resisting material. It is suitable for crushing high hardness materials such as quartzite and basalt. But because the manufacturing process is complicated, the price is also higher. 3. Hard alloy hammer head has high hardness, strong impact resistance and low cost. The high abrasion resistance of hard alloy hammer head is 20 times more than that of high manganese steel hammer head. The application of high manganese steel hammer head is widely applicable to all the broken industries. 锤头的失效主要是在作业状态下高速运转,与物料发生激烈撞击,作业部位遭到激烈冲击磨损。 The failure of the hammer head is mainly in the operating condition of high speed operation, and the material occurrence of the violent impact, the operation site is subjected to the fierce impact wear. 破碎机锤头在铸造生产中属于易损件,由于锤头寿命短而频频需要更换,从而降低了工作效率。锤头的失效主要是在破碎机在高速运转时,与物料发生猛烈撞击,锤头部分受到撞击而磨损。这时候就需要发明一种新工艺来改进锤头的寿命,能够使锤头兼具高硬度和耐磨性。 The hammer head of the crusher is a vulnerable part in the casting production, which needs to be replaced frequently due to its short life, thus reducing the working efficiency. The failure of the hammer head is mainly in the crusher in the high-speed operation, and the material in the impact, the hammer head part of the impact and wear. It is necessary to invent a new process to improve the life of the hammerhead, which can make the hammerhead have high hardness and wear resistance.

版权 © 洛阳锤铸造厂 友链:铸铁闸门 不锈钢铸件 光纤激光切割机 精密铸造
联系人:朱文杰  咨询热线:133 3388 9451  固定电话 :0379-64961800
客服信箱:13333889451@qq.com  地址:河南 洛阳 孟津工业园区 隆华大道  网址:www.chongjizuantou.com.cn
推荐:洛阳锤头,冲击钻头,打桩机锤头,冲孔锤头,实心钻头,管锥实锥,洛阳锤头厂家,冲孔锤头厂家,打桩机锤头价格 友链:化粪池模具 淤泥固化
保定网站建设保定遨游网络公司